Connecting The Power Supply - LaCie d2 DL DVD±RW Drive User Manual

LaCie d2 DL DVD±RW Drive
User's Manual

3.2. Connecting The Power Supply

There are two cables that are supplied with the power supply: one cable (A) connects to the LaCie drive; and the other cable
(B) connects to a power outlet, such as a wall outlet or a surge protector.
1
Connect Cable A to your LaCie Drive.
2
Connect Cable B to the Power Supply brick.
Connect Cable B to a grounded surge protector or wall outlet.
3
Your drive should now turn on automatically when you connect it to a FireWire/USB port on your computer.
Use only the AC adapter supplied with your specific LaCie drive. Do not use a power supply from
Caution!
another LaCie drive or another manufacturer. Using any other power cable or power supply may cause damage
to the device and void your warranty. Always remove the AC adapter before transporting your LaCie drive.
Failure to remove the adapter may result in damage to your drive and will void your warranty.
You may use your LaCie drive when in a foreign country, thanks to its autoswitching 100-240
Important Info:
Volt power supply. To be able to use this feature, you may need to purchase an appropriate adapter or cord.
Consult LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for
any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one
authorized by LaCie will void your warranty.
1
Power Supply brick
Cable A
3. Installing Your LaCie Drive
3
2
Cable B
page 17