LaCie d2 DL DVD±RW Drive User Manual page 23

LaCie d2 DL DVD±RW Drive
User's Manual
Windows 98SE, Me, 2000, and XP – USB Installation
After the first connection of a USB-based peripheral, Windows 2000 and XP detect the drive, and will install it automatically
as a new peripheral, even if you have previously installed it on another port on the same USB bus. Let Windows 2000 and
XP install the USB drivers of your LaCie drive.
Important Info: Windows 98SE and Me Users!
be using your drive's USB port, you will need to install the
USB 2.0 Drivers included on the LaCie DVD Utilities CD-
ROM.
Connect the device end of the Hi-Speed USB2.0 cable
1
into the Hi-Speed USB 2.0 port on the back of the LaCie
d2 DL DVD±RW Drive.
Connect the other end of the Hi-Speed USB 2.0 cable
2
into an available USB port* on your computer.
USB Cable, computer end
USB port
Computer models vary. Please consult your computer's User's Manual for the exact location of your interface.
If you will
Hi-Speed USB 2.0 cable - device end
Tech Note:
transfer rates you need to be connected to a
Hi-Speed USB 2.0 host interface. Otherwise,
you will be limited to USB 1.1 speeds. For
more information, please see sections:
5.6. Optimizing Data Transfers
7. USB Questions &
It may take a few seconds for your computer to
3
recognize the drive and assign it a letter.
Windows' CD and DVD icons are similiar – only
the name is different.
3. Installing Your LaCie Drive
To achieve Hi-Speed USB 2.0 data
Answers.
page 23