LaCie d2 DL DVD±RW Drive User Manual page 22

LaCie d2 DL DVD±RW Drive
User's Manual
Windows 98SE, Me, 2000, and XP – FireWire Installation
After the first connection of a FireWire-based peripheral, Windows detects the drive, and will install it automatically as a new
peripheral, even if you have previously installed it on another port on the same
FireWire bus. Let Windows install the FireWire drivers of your LaCie drive.
1
Connect one end of the FireWire cable into the FireWire
port on the back of the LaCie d2 DL DVD±RW Drive.
Your LaCie drive is compatible with the Sony
Tech Note:
iLink and DV interfaces (6-pin to 4-pin cables). In order to
use your drive with these interfaces, you must use an
appropriate LaCie certified interface cable (sold
separately) . Please contact your LaCie reseller or LaCie
Customer Support for the appropriate cable.
2
Connect the other end of the
FireWire cable into an available
FireWireport on your computer.
FireWire 400 port
Computer models vary. Please consult your computer's User's Manual for the exact location of your interface.
3. Installing Your LaCie Drive
FireWire 400 Cable 6-pin end
It may take a few seconds for your
3
computer to recognize the drive and
assign it a letter. Windows' CD and DVD
icons are similiar – only the name is
different.
page 22