LaCie d2 DL DVD±RW Drive User Manual page 20

LaCie d2 DL DVD±RW Drive
User's Manual
Mac OS 9.x and Mac OS 10.x – USB Installation
Connect the device end of the Hi-Speed USB2.0
1
cable into the Hi-Speed USB 2.0 port on the back of
the LaCie d2 DL DVD±RW Drive.
To achieve Hi-Speed USB 2.0 data
Tech Note:
transfer rates you need to be connected to a Hi-
Speed USB 2.0 host interface. Otherwise, you will
be limited to USB 1.1 speeds. For more
information, please see sections:
5.6. Optimizing Data Transfers
7. USB Questions &
2 Connect the other end of the Hi-Speed USB 2.0 cable
into an available USB port* on your computer.
USB Cable, computer end
USB port
Computer models vary. Please consult your computer's User's Manual for the exact location of your interface.
Answers.
3. Installing Your LaCie Drive
Hi-Speed USB 2.0 cable - device end
Important Info: Mac OS 9.x Users!
does not support the Hi-Speed USB 2.0
standard under Mac OS 9.x. You will be
limited to USB 1.1 speeds and will only be
able to burn CD media at 4x speed.
It may take a few seconds for the drive to
3
appear on your desktop, and an icon will only
appear when there is a DVD or CD in the drive
(CD and DVD icons are similiar; only the name
is different).
Mac OS X
CD/DVD Icon
page 20
Apple
Mac OS 9
CD/DVD Icon