T able of Contents page 1 LaCie DVD±RW Drive User’s Manual FireWire Table of Contents Foreword Precautions 1. Unpacking Your LaCie Drive 1.1. Minimum System Requirements 1.1.1. Mac Users 1.1.2. Windows Users 2. Getting Connected 2.1 Install the Recording Software 2.2 Connect the Power Supply and Switch On the Drive...
Page 3
Foreword page 3 LaCie DVD±RW Drive User’s Manual FireWire Canada Compliance Statement This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Manufacturer’s Declaration for CE Certification We hereby certify that this device is in compliance with both the EMC Directive (89/336/EEC) and the Low Voltage Directive (73/23/EEC) issued by the Commission of the European Community.
Always follow the basic precautions listed below to use your LaCie drive safely and correctly. Respecting these guidelines will help to avoid the possibility of personal injury to yourself or others, as well as to prevent damage to your device and other computer equipment.
Page 5
Precautions page 5 LaCie DVD±RW Drive User’s Manual FireWire General Use Precautions: • Do not expose the drive to temperatures outside the range of 5° C to 40° C (41° F to 104° F) during operation. Doing so may damage the drive or disfigure its casing. Avoid placing your drive near a source of heat or exposing it to sunlight (even through a window).
Become the producer, director and star of your own DVD epics, the DJ with the freshest music compilations, and the IT expert that archives all of your important files and data. Use your LaCie DVD±RW Drive in conjunction with the included software to create a wide-range of multimedia projects, view DVDs and backup critical volumes and folders.
Support for Mac OS X 10.3.2 or later MPEG encoding is a system intensive application and Important Note: to add LaCie drive support to requires most of a CPU’s power. This process can take several hours on applications that utilize Apple’s slower systems.
LaCie DVD±RW Drive User’s Manual FireWire 2. Getting Connected Follow these steps to quickly get your LaCie Drive powered on and connected to your computer. Click on a step to get started! 2.1. Install the Recording Software 2.2. Connect the Power Supply and Switch On the Drive 2.3.
2.1. Installing The LaCie DVD Utilities Insert your LaCie DVD Utilities CD-ROM into your internal DVD/CD-ROM, and follow the instructions below that are based on each particular operating system. For more information about the various programs, please refer to the Help sections of the specific software program.
LaCie Technical Support for assistance in choosing the right adapter. LaCie accepts no responsibility for any damage to the drive resulting from the use of an inappropriate adapter. Using an adapter other than one authorized by LaCie will void your warranty.
Getting Connected page 12 LaCie DVD±RW Drive User’s Manual FireWire 2.3. Connect the FireWire cable to your LaCie Drive and to your computer. FireWire Logo iLink Logo DigitalVideo Logo Examine the cable carefully and make sure that you have the FireWire cable properly aligned, then insert the cable firmly into the FireWire port on the back of the drive for a stable connection.
• Copy data to your hard drive first; • Use the correct media with the appropriate speed rating; • Use media that is free of scratches and fingerprints; Check LaCie’s Web site (www.lacie.com) often for the latest information on creating CDs and DVDs.
LaCie DVD±RW Drive User’s Manual FireWire 3.1.1. CD and DVD Media Definitions Your LaCie DVD±RW Drive will let you create, save and share your digital files to CD-R/RW, DVD-R/RW, DVD+R/RW and DVD+R9 DL media. Please refer to section 2.1. Minimum System Requirements and your recording software’s documentation...
Nearly all commercially-available DVD discs feature a Region Protection Code (RPC). In order to watch DVD-Video discs, the RPC needs to match the setting on the DVD player. By default, all LaCie DVD-Video-compatible drives are set to the RPC zone of the country in which it was purchased.
Media Tray To insert a disc, first gently lower the Drive Access Door (#1), and then push the Open/Close (#4) button on your LaCie DVD±RW Drive. When the disc tray opens, put the DVD or CD media into the tray with the label side facing up. Make sure the DVD or CD is correctly placed in the center of the disc tray.
Using Your laCie Drive page 17 LaCie DVD±RW Drive User’s Manual FireWire 3.3. Ejecting Discs Warning! Do not attempt to open the drive's disc tray or remove the DVD or CD while the unit is in use and being accessed by the computer. You may injure yourself, and damage the drive and/or your computer system. Do not transport the drive with the tray open or with a DVD or CD disc inside it.
Please refer to your recording software’s user's guide for information on how to best use your Important Note: LaCie DVD±RW drive in write mode. 3.6.1. DVD Writing Methods Disc at Once (DAO) – A DVD writing process in which the entire DVD is recorded in one session, and data cannot be added after the recording is finished.
Page 19
Using Your LaCie Drive page 19 LaCie DVD±RW Drive User’s Manual FireWire Restricted Overwriting (RO) – A DVD writing process that only applies to DVD±RW discs. With this method, if a disc has already been written to, new data segments can be randomly inserted anywhere within the recorded boundary. New data, however, can only be added to an area of the disc that has already been recorded over and from the point where the last session was stopped.
6-to-6-pin FireWire cable. Most FireWire-equipped laptop computers feature a 4-pin FireWire connector, so in order to connect your LaCie drive to a laptop with a 4-pin FireWire port, you will need to purchase a LaCie certified 6-to-4-pin FireWire cable (sold separately).
Helpful Information LaCie DVD±RW Drive User’s Manual page 21 FireWire 4.1.2. Disconnecting FireWire Devices FireWire external devices feature "plug & play" connection. This means that your drive can be connected and disconnected while the computer is running. To prevent failures, it is important you follow these steps when disconnecting your FireWire device.
1) Make sure that the FireWire cable is connected tightly and securely on both ends of the cable, from the drive to the computer. If you are using a FireWire cable other than the one supplied with your LaCie drive, check that it is FireWire (IEEE 1394) certified.
5-minute movie onto a 4.5GB disc (the DV format is equivalent to 13GB per hour). MPEG-II compression allows you to fit a full-length feature film, plus bonus material, on just one disc. In order to play DVD-Video discs using your LaCie DVD±RW Drive, you need to have an appropriate MPEG-II decoder. You have two options: 1) Install the MPEG-II decoder software if your PC is equipped with a processor that is 400MHz or faster.
Helpful Information LaCie DVD±RW Drive User’s Manual page 24 FireWire 4.4 DVD Capacity There are important factors to consider when recording video, audio or data to DVD. The DVD media specification provides for two physical sizes: 4.7” (12cm) and 3.1” (8cm) (both are .47” (1.2cm) thick). DVD discs can also be single-sided (SS) or double-sided (DS), and each side can have one (SL) or two (DL) layers of data.
5. Troubleshooting In the event that your LaCie DVD±RW Drive is not working correctly, please refer to the following checklist to find out where the problem is coming from. If you have gone through all of the points on the checklist and your drive is still not working www.lacie.com...
Page 26
If you cannot see the device, recheck the cables and try the other troubleshooting solutions listed here. Is there a conflict with other device Consult LaCie Technical Support. See section 6. Contacting drivers or extensions? Customer Support for more details.
Page 27
Possible Solutions The drive is not Is there a conflict with other device Mac OS 9.x Users: If your LaCie drive is not being drivers or extensions? recognized by the recording software, you may be recognized. experiencing an extension conflict between the software and iTunes or Disc Burner.
Page 28
• If recording from CD or DVD-ROM to disc, make sure that the speed of the source device is high enough to provide a sufficient data stream to the LaCie drive. Reduce the write speed of the LaCie drive using the appropriate menu in the recording software.
Page 29
Are you using a Mac? This is normal. For legal reasons, if you do not have a built-in will not work. DVD-ROM or Combo Drive, your LaCie DVD Drive cannot currently be used for DVD-Video playback on a Mac. DVD-Video playback Have you installed the appropriate Ensure that the MPEG-II software has been installed correctly.
If you have asked yourself all of the pertinent questions in the troubleshooting checklist, and you still can't get your LaCie drive to work properly, contact us via the provided Web link. Before contacting us, make sure that you are in front of your computer and that you have the following information on hand: •...
Page 31
Contacting Customer Support LaCie DVD±RW Drive User’s Manual page 31 FireWire LaCie Technical Support LaCie Australia LaCie Belgium LaCie Canada (English) Contact Us At: Contact Us At: Contact Us At: http://www.lacie.com/au/contact/ http://www.lacie.com/be/contact/ http://www.lacie.com/caen/contact/ LaCie Denmark LaCie Finland LaCie France Contact Us At:...
• The tamper seal on the drive casing is broken. LaCie and its suppliers accept no liability for any loss of data during the use of this device, or for any of the problems caused as a result. As a precaution, it is recommended that the CD-R/RW, DVD-R/RW and DVD+R/RW media be tested after they have been written to.
Need help?
Do you have a question about the 300979 - d2 16x DVD±RW FireWire HDD and is the answer not in the manual?
Questions and answers