Table of Contents
Advertisement
TIRES
The X-Treme X-360 uses an identical tire on the front and rear wheels, which
means that the tires can be rotated. Tire wear will differ based on rider weight,
riding conditions and care. Replacement tires can be obtained at your local
X-Treme dealer, through motorcycle shops, or from the X-Treme website at
www.x-tremescooters.com
Tire Pressure
The tires must be inflated to a maximum of 36 P.S.I. It is also recommended to
use a tube additive like Slime, available from any motorcycle shop, to avoid
inconvenient punctures.
Batteries
The X-400 is a 36V system. The batteries are located under the footplate of
the scooter. Should you need to service the batteries, simply unscrew the two
bolts that hold the footplate down and raise the plate.
MAINTENANCE
RECOMMENDED TOOLS
To adjust and service the X-Treme X-400 you will need the following tools:
Allen Wrenches: 3/4/5/6 mm
Wrenches: 10/13/13 mm Open end wrench
Large Adjustable Crescent Wrench
Philips Head Screwdrivers
Oil, Grease or Lubricant
ADJUSTING THE CHAIN
The chain will come adjusted from the factory. However, it may be necessary
to adjust the chain from time to time. The chain must be well aligned onto the
sprockets in order to avoid uneven wear. This will result in shortened chain
life.
How tight should the chain be?
If the chain is skipping or jumping on the sprockets, this is too
loose and may be harmful.
If the chain is making a humming sound when the wheel is
turning, this is too tight and may cause the chain to snap.
The correct tension is achieved by adjusting the chain from its
loose position to when it becomes lightly tense.
Page11
Advertisement
Table of Contents
