Service
Inspect Tires for wear and
condition and inflation
Check and adjust Brake
Check operation of all lighting
and horn devices. Replace
globes if necessary
Test Battery Capacity
Replace Wheel Baring Grease
Full Brake Pad Change over
Check condition and torque
settings of wheel nuts and
suspension forks
Follow these instructions should the need arise to remove the front or rear wheels.
Rear Wheel Assembly Instructions
1. First, remove the two screws that hold the plastic plates on both sides of rear wheel.
See figure 1-5:
2. Remove the screw from the end of Brake Cable, and then pull the cable out. See figure 1-6:
Maintenance ----Schedule
Daily
Monthly
Yes
Yes
Yes
Yes
Yes
Yes
figure 1-5
figure 1-6
16
Interval
Every
6
Yearly
Months
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes