Assembly And Setup - X-TREME XB-300Li Owner's Manual

Model of Pedal Electric Assisted System:
1st gear: Biking without electric assistance, 2nd gear,
Standard Pedalling with electric assistance at rate of 1:1

ASSEMBLY AND SETUP

If your XB-300Li was removed from its carton and "set
up" by retail store personnel, there is no guarantee it was
properly set up. Please observe and follow this checklist,
even if your XB-300Li was out of its carton when you
purchased it. This will ensure its safe and reliable
operation.
1) Remove your XB-300Li from its shipping carton. Cut
away any residual packing materials with a sharp knife or
scissors. Tools needed for setup are included in the XB-
300Li tool kit.
2) Inflate the front and rear tires to 35 PSI.
3) Your XB-300Li has been in transit and storage. You
must charge the batteries before riding it. Charge the
battery by plugging in the included charger into the XB-
300Li Charger socket.
10