Table of Contents
Advertisement
7.) BATTERY CONNECTION & INITIAL CHARGING
8.) TIRE INFLATION
Finally, inflate both tires to the minimum recommended tire pressure depending on the number of
riders that will be using the bike. Recommended tire pressure is between 35-40 PSI.
Be sure to check all nuts screws and bolts including ones not mentioned in the set up, for tightness
and fit before riding.
1.
Unlock battery box located on the
foot plate.
2.
Remove battery pack and locate
plug.
3.
Plug battery wire into battery pack
and reinstall pack into foot plate.
4.
Lock battery pack in place.
5.
Charge the batteries until the light
turns green indicating that the battery is
completely charged.
IMPORTANT:
DO NOT CHARGE
FOR MORE THAN 8 HOURS AS
THIS CAN DAMAGE BATTERIES.
11
Advertisement
Table of Contents
