Network Cables; Network Application; Product Specifications - Rosewill RGS-1016 User Manual

6. Insert the unit into the rack with suitable screws
7. Reconnect all the cables.

Network Cables

In making a switch interconnection, you could use any port to connect
another switch with straight or crossover cable. As all the ports support
auto MDI / MDI-X function, using a straight cable to make a
switch-to-switch connection is allowed.
1. Crossover or straight-through cable: All the ports on the switch
support Auto-MDI/MDI-X functionality. Both straight-through or
crossover cables can be used to connect the switch with PCs as well
as other devices like switches, hubs or router.
Category 3, 4, 5, 5e or 6 UTP/STP cable: To make a valid
2.
connection and obtain the optimal performance, appropriate cables
corresponding to different transmitting/receiving speed is required. To
choose a suitable cable, please refer to the following table.
Media
10/100/1000
Mbps
copper

Network Application

Product Specifications

Standard
Interface
Speed Wiring
10Mbps Category 3, 4, 5 UTP/STP
100Mbps Category 5 UTP/STP
1000Mbps Category 5e, 6 UTP/STP
IEEE802.3 10BASE-T
IEEE802.3u 100BASE-TX
IEEE802.3ab 1000BASE-T
IEEE802.3x full-duplex flow control
IEEE802.3az (Energy Efficient Ethernet)
IEEE802.1p (QoS)
16x 10/100/1000 Mbps RJ-45 ports
8