Roland OCTA-CAPTURE Owner's Manual page 20

Operation of the OCTA-CAPTURE
7.
The screen indicates "Ready to install
the driver . " With power to the OCTA-
CAPTURE switched off, use a USB
cable to connect it to your computer .
If any other message appears, proceed as
directed by the message.
Operation of the OCTA-CAPTURE
8.
The indication "Found New Hardware" will appear in the lower right corner of your screen.
* It may take between ten seconds to several minutes for the "Found New Hardware Wizard" to
appear .
9. If you are asked whether you want to connect to Windows Update, choose [No, not
this time] and click [Next] .
10. Choose [Install the software
automatically (Recommended)], and
click [Next] .
20
Switch on the OCTA-CAPTURE's power (p . 31) .