Threading The Machine; To Set The Needle Thread - Janome Sewing Machine Instruction Book

z
c
v
b
z
x
c
v
b
y
24
q
x
w
e
r
t

Threading the Machine

To set the needle thread

Raise the needle to the highest position by rotating the
hand wheel. Raise the presser foot with the presser foot
lifter q.
q Presser foot lifter
z Lead the thread from the spool and pass it through
the thread guide w. Then draw it down along the right
slot.
w Thread guide
x Then, down around the thread guide plate e.
e Thread guide plate
c Raise the take-up lever to its highest position by
turning the handwheel towards you.
Firmly draw the thread from right to left over the
take-up lever r and down into the take-up lever r
eye.
r Thread take-up lever
v Draw the thread down and slide the thread
behind the needle bar thread guide t from the left.
t Needle bar thread guide
b Use the needle threader to thread the needle.
y Needle
(see page 26).