Inserting The Bobbin - Janome Sewing Machine Instruction Book

z
e
x
c
y
v
u
22

Inserting the bobbin

q
z Place the bobbin q in the bobbin holder w with the
w
x Guide the thread into the notch r on the front
r
t
c Continue to draw the thread lightly until the
v Attach the hook cover plate i. Check the threading
o
i
thread running off as illustrated.
q Bobbin
w Bobbin holder
e End of thread
side of the bobbin holder. Draw the thread to the
left, sliding it between the tension spring blades.
r Front notch
t Spring
thread slips into notch y. Pull out about 15 cm
(6˝) of thread.
y Side notch
by referring to the chart o shown on the hook cover
plate.
u Bobbin thread
i Hook cover plate
o Threading chart