Table of Contents
Advertisement
FS-8700-73 BACnet MSTP Driver Manual
Appendix A.12. Using a .ini file to set the Vendor_ID and Vendor_Name of the Device Object
The vendor.ini file can be used to change the BACnet Vendor Name and Vendor ID if desired. A file with the
following format must be created and downloaded to the FieldServer using the Ruinet "Download Configuration"
command.
vendor_name = Sierra Monitor Corporation
vendor_id = 37
Please note that changing the Vendor_ID and Vendor_Name on FieldServer BTL approved products may disqualify
them from the BTL approval.
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.FieldServer.com
Tel: (408) 262-2299 Fax: (408) 262-2269 Toll Free: (888) 509-1970 email: support@FieldServer.com
Page 33 of 48
Advertisement
Table of Contents
