Appendix A. Reference; Appendix A.1. Device Information Table; Appendix A.1.1. Property Files - FieldServer FS-8700-23 Driver Manual

FS-8700-23 Cleaver Brooks Hawk Driver Manual

Appendix A. Reference

Appendix A.1. Device Information Table

NETWORK INTERFACE UNIT
MAKE MODEL NAME
Honeywell Q7700 Network Interface Unit
Cleaver Brooks 833-2771 CB-Link
CONTROL MODULES
MODEL No.
MAKE MODULE NAME
OF MODULE
Honeywell QS7700A BCS7700
Honeywell QS7800A 7800 SERIES Control
QM40XX
Honeywell QS7800C
Acquisition Module
Armstrong QS7800D Trapscan System
Honeywell QS7800E PulsaFeeder PULSAtrol PULSA
S7830
Honeywell QS7800A
Annunciator
S7800
Honeywell QS7800A Keyboard/Display
Module
Honeywell QS7800A ST7800 Relay Module ST7800
RM7800E,G,L,M Relay
Honeywell
Modules
RM7840E,G,L,M Relay
Honeywell
Modules

Honeywell N/A Q7700A,B
CB-Link 833-2727 Display Module
Data
CB-Link 833-2729
Module
CB-Link 833-2734 CB 783
CB-Link 833-2734 CB 780
CB-Link 833-2734 CB 784
Appendix A.1.1. Property Files
Each Controller interfacing to the FieldServer requires associated property files (denoted by file extensions .bp1
and .bp2) to be loaded into the FieldServer. The property files listed in the device information table (Appendix A.1)
are preloaded onto the FieldServer when delivered. Other property files may be available upon request.

This is the chassis that the above modules plug into
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
PROPERTY
NAME (.BP1;.BP2)
N/A
N/A
Data
ON REQUEST
ON REQUEST
Expanded
S7830
S7800
RM78XX
RM78XX
N/A
Control Bus
N/A
ON REQUEST
ON REQUEST
ON REQUEST
FILE CONFIGURATION FILE
NAME (.CSV)
N/A
N/A
QM40XX
ON REQUEST
PULSA
S7830
S7800
RM78XX
RM78XX
N/A
N/A
ON REQUEST
ON REQUEST
ON REQUEST
Page 10 of 11
NOTES
Data Acquisition
Modules
Expanded
Annunciator
Requires S7800
module
Requires 833-2727 or
833-2729 on module