Icom IC-PW1 Instruction Manual page 11

• Using a 13-pin ACC socket (IC-706 series)
To an
antenna
ACC-1
ANT
IC-PW1/EURO
AC outlet
(IC-PW1
IC-PW1EURO : 230 V)
• Using 2 Icom exciters (transceivers)
To an
antenna
ACC-1
ANT
ACC-2
REMOTE
IC-PW1/EURO
AC outlet
(IC-PW1
IC-PW1EURO : 230 V)
Remote control cable (supplied)
ACC cable (supplied)
REMOTE
INPUT1
EXCITER
1 1&2
GND
: 100–120/220–240 V
Remote control cable (supplied)
ACC cable (supplied)
Coaxial cable (supplied)
REMOTE
INPUT1
INPUT2
EXCITER
1 1&2
GND
Ground
: 100–120/220–240 V
Optional ACC cable (includedn in the OPK-5)
Optional remote control cable (includedn in the OPK-5)
Be sure to connect the cable to the 7-pin ACC(2) jack.
INSTALLATION AND CONNECTIONS
OPC-599 (optional)
ACC (13 pins)
ANT1
Coaxial cable
(supplied)
IC-706 series
GND
Ground
The following connections also apply to trans-
ceivers having multiple antenna connectors for
specified bands (e.g. IC-726, IC-729, etc.)
OPC-599 (optional)
ANT1
GND
OPK-5
(optional)
ANT1 or 2
GND
REMOTE
ACC REMOTE
IC-706 series
IC-756
ACC(2) REMOTE
2
8