Assembly; Features - RIDGID R138HPA Operator's Manual

FEATURES

KNOW YOUR HEADLESS PINNER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator's manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BELT HOOK
The pinner can be hung from a tool belt when disconnected
and not in use. The belt hook can be set on either the left or
right side, depending on operator preference.
DUAL ACTUATION TRIGGER SYSTEM
The headless pinner has a dual actuation trigger system.
The secondary trigger must be pulled before a fastener can
be driven by pulling the primary trigger.
IN-HANDLE AIR FILTER
The self-cleaning in-handle air filter helps keep debris out
to extend the life of the tool.

ASSEMBLY

UNPACKING
This product has been shipped completely assembled.
 Carefully remove the tool and any accessories from the
box. Make sure that all items listed in the packing list are
included.
 Inspect the tool carefully to make sure no breakage or
damage occurred during shipping.
 Do not discard the packing material until you have
carefully inspected and satisfactorily operated the tool.
 If any parts are damaged or missing, please call
-866-539-70 for assistance.
PACKING LIST
Headless Pinner
Oil
Hex Keys
Sample Fasteners
Eye Protection
Fastener Guide
Operator's Manual
INTERNAL PISTON CATCH
The internal piston catch delivers consistent driving power.
MUFFLER
The muffler reduces noise during operation.
NO-MAR PAD
The no-mar pad prevents marring and denting when using
the tool on softer woods.
ON-BOARD STORAGE
The headless pinner has convenient on-board storage for a
hex key and no-mar pad.
qUICK-CONNECT SWIVEL CONNECTOR
The quick-connect swivel connector helps prevent hose
tangles.
RELOAD INDICATOR
The reload indicator lets the operator see if the magazine is
ready to reload with fasteners.
WARNING:
If any parts are damaged or missing, do not
operate this tool until the parts are replaced.
Failure to heed this warning could result in possible
serious personal injury.
WARNING:
Do not attempt to modify this tool or create
accessories not recommended for use with this
tool. Any such alteration or modification is misuse
and could result in a hazardous condition leading
to possible serious personal injury.
9