Accessories; Troubleshooting - RIDGID R138HPA Operator's Manual

ACCESSORIES

To order parts and maintenance kits, call -866-539-70.
Driver Maintenance Kit ....................................................................................................................................0790800064
Overhaul Kit .....................................................................................................................................................0790800063
Oil and Wrench Kit...........................................................................................................................................079080006
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.

TROUBLESHOOTING

PROBLEM
Air leak near the top of the tool or
in the trigger area
Air leak near the bottom of the
tool
Tool does nothing or operates
sluggishly
Tool jams frequently
POSSIBLE CAUSE
Loose cap
Worn or damaged O-rings or
seals
Worn or damaged O-rings or bumper
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine or nose bolts
Dirty magazine
Worn or damaged driver
Fasteners are not placed toward the
bottom of the magazine
Fasteners are inserted backward
8
SOLUTION
Tighten cap
Install Overhaul Kit
Install Overhaul Kit
Verify adequate air supply
Lubricate the tool
Install Overhaul Kit
Verify that fasteners are the correct size
Replace fasteners
Tighten bolts
Clean magazine
Install Driver Maintenance Kit
Install fastener tips at the bottom of the
magazine
Make sure the point of the fasteners and
directional arrow point down toward the
bottom of the magazine