LOCK BOLT REPLACEMENT PROCEDURE
1.
Place the snowblower on a firm, level surface.
2.
Turn the engine switch OFF, and remove the cap from the spark plug.
3.
Clean the auger and blower of snow, ice or any other foreign
particles.
4.
Check the entire snow clearing mechanism.
5.
Replace any broken lock bolts. Tighten securely.
HS928:
HS1332:
SERVICING YOUR SNOWBLOWER
LOCK BOLT
6 mm SELF LOCK NUT (2)
6 mm SELF LOCK NUTS
LOCK BOLTS
6 mm SELF LOCK NUT
LOCK BOLT (2)
LOCK BOLT
51