Transporting; Before Loading - Honda HS928 Owner's Manual

TRANSPORTING

BEFORE LOADING

1. Loading the snowblower on a trailer should be performed on a firm,
level surface.
2. Use a loading ramp that is strong enough to support the combined
weight of the snowblower and the operator:
Weight of snowblower: (Operating weight)
Types
TA
TAS
WA
WAS
3. The loading ramp must be long enough so
that its slope is 15° (26%) or less:
Length of
Ramp (L)
Height (H)
4. If the truck bed has a low roof or cover, with less than 5 ft (1.5 m) of
headroom, lower the discharge deflector for better clearance, or
remove the chute assembly.
5. Check that there is sufficient fuel in the tank. The engine may stall on
the ramp if there is not enough fuel in the tank.
60
Models
254 lbs (115 kg)
265 lbs (120 kg)
220 lbs (100 kg)
231 lbs (105 kg)
8.2 ft 9.8 ft
(2.5 m) (3.0 m)
1.6 ft 2.0 ft
(50 cm) (60 cm)
HS928
11.5 ft
(3.5 m)
2.3 ft
(70 cm)
HS1332
265 lbs (120 kg)
276 lbs (125 kg)
L
H