ENGINE OIL CHANGE
Drain the oil while the engine is still warm to assure rapid and
complete draining.
1.
Place the snowblower on a level surface.
2.
Place a suitable container below the engine to catch the used oil,
then remove the oil filler cap/dipstick and the drain plug.
To avoid loosening the drain plug extension, hold it with a 17 mm
wrench while loosening the drain plug with a 10 mm wrench.
3.
Allow the used oil to drain completely into an approved container,
then reinstall the drain plug with a new sealing washer, and tighten
it securely.
Improper disposal of engine oil can be harmful to the environment.
If you change your own oil, please dispose of used motor oil
properly. Put it in a sealed container, and take it a recycling center.
Do not throw it in the trash, pour it on the ground, or pour it down a
drain.
SERVICING YOUR SNOWBLOWER
DRAIN PLUG
SEALING WASHER
43