Hide thumbs Also See for HSS1332A:

Advertisement

QUICK FIND
Add Fuel . . . . . . . . . . . . . . . . . . . . . . . .
Check the Engine Oil Level . . . . . . . . .
Dealer Locator Information . . . . . . . . .
CONTENTS
FOR YOUR SAFETY . . . . . . . . . . . . . .
PARTS AND CONTROLS. . . . . . . . . . .
List of Parts . . . . . . . . . . . . . . . . . . . .
Add Engine Oil. . . . . . . . . . . . . . . . . .
BEFORE EACH OPERATION . . . . . . .
Check Your Snow Blower . . . . . . . . .
Check Your Work Area. . . . . . . . . . . .
Add Fuel . . . . . . . . . . . . . . . . . . . . . .
OPERATION. . . . . . . . . . . . . . . . . . . . .
Snow Blower Safety. . . . . . . . . . . . . .
Operating the Controls. . . . . . . . . . . .
Engine Switch . . . . . . . . . . . . . . . . .
Auger-lock Indicator . . . . . . . . . . . .
Hour Meter . . . . . . . . . . . . . . . . . . .
Fuel Valve Lever . . . . . . . . . . . . . . .
Starter Grip . . . . . . . . . . . . . . . . . . .
Throttle Lever . . . . . . . . . . . . . . . . .
Choke Knob . . . . . . . . . . . . . . . . . .
Shift Lever. . . . . . . . . . . . . . . . . . . .
Chute Control Switch . . . . . . . . . . .
Drive Clutch Lever . . . . . . . . . . . . .
Auger Clutch Lever . . . . . . . . . . . . .
Steering Control Levers . . . . . . . . .
Height Adjusting Lever . . . . . . . . . .
To register your snow blower, scan
the QR code or see
for additional ways to register.
00X31V45 A158
5
Engine Oil Change . . . . . . . . . . . . . . .
5
Engine Oil Recommendations . . . . . .
25
How to Contact Honda . . . . . . . . . . . .
2
Features . . . . . . . . . . . . . . . . . . . . . .
3
LED Work Light. . . . . . . . . . . . . . .
4
Snow Clearing Bar . . . . . . . . . . . .
4
Auger-Lock Indicator. . . . . . . . . . .
4
Hour Meter . . . . . . . . . . . . . . . . . .
4
Starting the Engine . . . . . . . . . . . . .
4
Stopping the Engine . . . . . . . . . . . .
5
Clearing Snow . . . . . . . . . . . . . . . . .
5
Snow-clearing Tips . . . . . . . . . . . . .
5
Removing Obstructions . . . . . . . . . .
5
5
Maintenance Safety . . . . . . . . . . . . .
6
Maintenance Schedule . . . . . . . . . .
6
Engine Oil Change. . . . . . . . . . . . . .
7
7
Spark Plug . . . . . . . . . . . . . . . . . . . .
7
Track Adjustment . . . . . . . . . . . . . . .
7
Tire Inspection . . . . . . . . . . . . . . . . .
8
8
Shear Bolt Replacement . . . . . . . . .
8
Skid Shoes and Scraper . . . . . . . . .
8
TRANSPORTING . . . . . . . . . . . . . . . .
8
Before Loading . . . . . . . . . . . . . . . .
8
Loading . . . . . . . . . . . . . . . . . . . . . .
8
9
9
9
REGISTER YOUR PRODUCT
page 31
© 2015-2023 American Honda Motor Co., Inc.-All Rights Reserved
OWNER'S MANUAL
HSS928A • HSS1332A
SNOW BLOWER
Before operating the snow blower for the first time, please read this
Owner's Manual. Even if you have operated other snow blowers,
take time to become familiar with how this snow blower operates and
practice in a safe place until you build up your skills.
15
Maintenance Schedule . . . . . . . . . . . . . . . . . . .
15
Operating the Controls . . . . . . . . . . . . . . . . . . . .
25
Spark Plug . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
STORAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10
Storage Preparation. . . . . . . . . . . . . . . . . . . .
10
Storage Precautions . . . . . . . . . . . . . . . . . . .
10
Removal from Storage. . . . . . . . . . . . . . . . . .
10
TROUBLESHOOTING . . . . . . . . . . . . . . . . . . .
10
Engine Problems . . . . . . . . . . . . . . . . . . . . . .
11
Drive Problems . . . . . . . . . . . . . . . . . . . . . . .
12
Snow Blower Problems . . . . . . . . . . . . . . . . .
12
TECHNICAL INFORMATION . . . . . . . . . . . . . .
13
Serial Number Locations . . . . . . . . . . . . . . . .
13
High Altitude Operation . . . . . . . . . . . . . . . . .
13
Emission Control System. . . . . . . . . . . . . . . .
14
Air Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
Specifications. . . . . . . . . . . . . . . . . . . . . . . . .
15
15
CUSTOMER INFORMATION . . . . . . . . . . . . . .
16
Parts, Accessories, and Service Items . . . . .
16
Dealer Locator Information . . . . . . . . . . . . . .
16
How to Contact Honda. . . . . . . . . . . . . . . . . .
16
Honda Publications . . . . . . . . . . . . . . . . . . . .
16
17
17
PRODUCT REGISTRATION . . . . . . . . . . . . . .
17
QUESTIONS?
Contact your Honda dealer.
There is a dealer locator at
powerequipment.honda.com
14
7
15
18
18
20
20
20
20
20
21
21
21
21
22
22
23
24
25
25
25
25
25
26
27
31

Advertisement

Table of Contents
loading

Summary of Contents for Honda HSS1332A

  • Page 1: Table Of Contents

    Shear Bolt Replacement ..Honda Publications ....Throttle Lever ....
  • Page 2: For Your Safety

    Important Message to Parents WELCOME The safety of your children is very important to Honda. Snow blowers are tools, not toys. As with any equipment, bad judgments can result in serious injuries. Your child must be big enough, strong enough, and...
  • Page 3: Parts And Controls

    PARTS AND CONTROLS Track-Type Models Wheel-Type Models SHIFT LEVER CHUTE CONTROL SWITCH CHUTE GUIDE THROTTLE LEVER THROTTLE LEVER (double-articulating SHIFT for HSS1332A CHUTE CONTROL FUEL TANK CAP LEVER electric-starter SWITCH model only) CHUTE GUIDE SNOW FUEL TANK DISCHARGE SNOW FUEL VALVE...
  • Page 4: Initial Snow Blower Setup

    Do not thread the dipstick in when checking the oil level. All Honda engines are run at the factory prior to packaging. Most of the oil is removed prior to shipment; however, some oil remains in the engine.
  • Page 5: Before Each Operation

    Check Your Work Area BEFORE EACH OPERATION For your safety and the safety of others, always inspect the area before operating the snow blower. Your safety is your responsibility. A little time spent in preparation will Anything that can be picked up by the auger and thrown is a potential significantly reduce your risk of injury.
  • Page 6: Operation

    Snow Blower Safety 1. Remove the fuel tank cap and check the fuel level. Honda snow blowers are designed to clear snow from driveways and 2. Refill the tank if the fuel level is low. Do not fill above the base of walkways.
  • Page 7: Operating The Controls

    Auger-lock Indicator AUGER-LOCK INDICATOR Operating Conditions (HSS1332A Electric-starter model) Do not use the snow blower when visibility is poor. Under conditions OFF – The auger-lock indicator of poor visibility, there is a greater risk of striking an obstacle or is off.
  • Page 8: Fuel Valve Lever

    Fuel Valve Lever FUEL VALVE LEVER FORWARD FORWARD The fuel valve opens and closes the N (NEUTRAL) fuel line leading from the fuel tank to REVERSE FAST the carburetor. Make sure that the fuel valve lever is positioned exactly SLOW at either the ON or OFF position.
  • Page 9: Auger Clutch Lever

    Auger Clutch Lever Pull both steering control levers at the same time to momentarily disengage the transmission. With the transmission disengaged, the Depress the auger clutch lever to start the snow blowing mechanism. snow blower is free to maneuver (push or pull) by hand with or without If the drive clutch lever is engaged, the auger clutch lever will lock the engine running.
  • Page 10: Led Work Light

    Features Hour Meter (HSS1332A Electric-starter model) LED Work Light LED WORK LIGHT The hour meter shows the The LED work light comes accumulated engine running on while the engine is time of the snow blower. Use it running, and it goes off as a guide for inspection or when the engine stops.
  • Page 11: Stopping The Engine

    Electric-starter Models b. Squeeze the drive DRIVE CLUTCH LEVER clutch lever for Turn the engine switch to the about 30 seconds START position and release to warm up the START the switch after the engine has transmission fluid. started. The switch automatically returns to the ON position.
  • Page 12: Clearing Snow

    Slower speeds are several steps, as shown below, or install the drift-breaker kit required for deep (optional part) that is available from your authorized Honda snow and/or wet, heavy snow. blower dealer. 3. Track-type models only: Set the auger height to the desired...
  • Page 13: Removing Obstructions

    2. Remove the snow clearing bar to clear the obstruction. To ensure the best quality and reliability, use only new Honda Genuine parts or their equivalents for repair or replacement. SNOW CLEARING Maintenance, replacement, or repair of the emission control devices and systems may be performed by any engine repair establishment or individual, using parts that are certified to EPA standards.
  • Page 14: Maintenance Schedule

    (1) For professional commercial use, log hours of operation to determine proper maintenance intervals. (2) These items should be serviced by your Honda servicing dealer, unless you have the proper tools and are mechanically proficient. Refer to the Honda Shop Manual for service procedures. See “Honda Publications” on page 25 for ordering information.
  • Page 15: Engine Oil Change

    To avoid loosening the drain plug extension, hold it with a 17 mm the API label on the oil wrench while loosening the drain plug with a 10 mm wrench. container. Honda recommends that you use SEALING WASHER DRAIN PLUG API SERVICE category SJ or later (or equivalent) oil.
  • Page 16: Track Adjustment

    Additional shear and then slowly lower wheel-type bolts and nuts are available from authorized Honda snow blower installation) the auger until the skid dealers. shoes contact the ground.
  • Page 17: Transporting

    Do not tie with rope or straps stronger than necessary to prevent Weight of snow blower (operating weight): damage to the snow blower. Tie-down Points HSS928A HSS1332A Track 276 lb (125 kg) 298 lb (135 kg) Front Track/Electric-starter...
  • Page 18: Storage

    The Distributor’s Limited Warranty does not cover fuel system STORAGE damage or engine performance problems resulting from neglected storage preparation. You can extend fuel storage life by adding a fuel stabilizer that is Storage Preparation formulated for that purpose, or you can avoid fuel deterioration Proper storage preparation is essential for keeping your snow blower problems by draining the fuel tank and carburetor.
  • Page 19 6. Pull the starter grip slowly until you feel resistance, then return the starter grip gently. This will close the valves so moisture cannot 5 - 10 hours at 1.8 A (HSS1332A) enter the engine cylinder. 6. Install the battery in the reverse order of removal.
  • Page 20: Troubleshooting

    TROUBLESHOOTING Rotate the fuse holder cover and pull the fuse out. If blown, replace with a fuse of the same type and rating. Engine Problems HSS1332A (electric start) HSS928A (electric start) Starter operates, but engine will not start Possible cause...
  • Page 21: Technical Information

    10). Foreign object stopping the Remove the foreign object. auger from rotating. Belt worn, not on the pulleys See servicing Honda snow or not properly installed. blower dealer. Snow not discharging properly Possible cause Correction Auger spinning too slowly.
  • Page 22 14. Remember that this monoxide does not react in the same way, but it is toxic. schedule is based on the assumption that your Honda engine product will be used for its designed purpose. Sustained high-load or Honda utilizes appropriate air/fuel ratios and other emissions control...
  • Page 23 Specifications Frame Frame HSS928A HSS1332A Track/ Wheel/ Track Track/Elec. Start Track Elec. Wheel Elec. Description code SAFA Start Start Overall length 58.5 in (1,485 mm) Description code SADA Overall width 32.9 in (835 mm) Overall length 58.5 in (1,485 mm) Overall height 43.5 in (1,105 mm)
  • Page 24: Avoiding Fuel-Related Problems

    AVOIDING FUEL-RELATED PROBLEMS When properly maintained, your Honda snow blower should provide years of trouble-free operation. This includes the fuel system. However, gasoline can quickly deteriorate (in as little as 30 days) causing starting or running problems and, in some cases, damage to the fuel system.
  • Page 25: Customer Information

    ® See your local dealer. Battery charger Battery Tender effect at the time of approval for printing. American Honda Motor Co., Drift breaker kit 06760-768-000AH Inc. reserves the right, however, to discontinue or change specifications or design at any time without notice and without...
  • Page 26: Distributor's Limited Warranty

    Honda equipment or engines to be eligible for warranty coverage. Installing parts and accessories on non-Honda products American Honda will repair or replace, at its option, any part that is proven to be or engines voids this warranty.
  • Page 27: Emission Control System Warranty

    Honda Power Equipment dealer fuel-injection system, the ignition system, catalytic converter, fuel tanks, fuel who is authorized by Honda to sell and service that Honda product during their lines (for liquid fuel and fuel vapors), fuel caps, valves, canisters, filters, clamps normal business hours.
  • Page 28 NOTES...
  • Page 29 NOTES...
  • Page 30 NOTES...
  • Page 31: Product Registration

    From time to time, American Honda conducts sales promotions that require you to register your snow blower within 30 days of purchase. If you purchased your Honda snow blower during one of these promotions, you must register your snow blower within 30 days.
  • Page 32 Register Your Product Online 1. Go to powerequipment.honda.com/reg to register your unit. Enter your serial number, and then click Submit. Complete the required information and click Submit. It’s that simple! NO POSTAGE NECESSARY Product Registration IF MAILED IN THE UNITED STATES...

Table of Contents