Removal From Storage - Honda Marine BF135A Owner's Manual

OUTBOARD MOTOR STAND
If the outboard motor will be
removed from the boat for storage,
we recommend storing it vertically
by mounting it on a commercially
available stand.
PROTECTOR
If it is necessary to store the outboard
motor horizontally as shown, drain
the vapor separator (p.
drain the engine oil (p. 66
removing the outboard motor from
the boat.
Rest the outboard motor on a cushion
of protective material.
Cover the outboard motor to keep out
dust. Do not use plastic sheet as a
dust cover. A nonporous cover will
trap moisture, promoting rust and
corrosion.

REMOVAL FROM STORAGE

Check your outboard motor as
described in the
OPERATION
If the cylinders were coated with oil
during storage preparation, the
engine may smoke briefly at startup.
This is normal.
86 ), and
), before
STORAGE
BEFORE
chapter of this manual.
89