Trolling Speed Control - Honda Marine BF135A Owner's Manual

Trolling Speed Control

(optional equipment)
SWITCH PANEL
TRL (Trolling) CONTROL SWITCH
DN: Reduce engine speed
UP: Increase engine speed
The engine must be fully warmed up
before you can activate the Trolling
Speed Control.
Place the outboard motor in-gear
with the throttle control in the fully
closed (idle) position. Press and hold
the UP or DN side of the TRL
control switch to activate the Trolling
Speed Control. The buzzer will make
one long sound indicating activation.
The initial trolling speed is set at 650
RPM.
The engine speed can be adjusted in
50 RPM increments by pressing the
UP or DN side of the TRL control
switch. A short sound of the buzzer
occurs each time the engine speed is
adjusted.
In Trolling Speed Control mode, the
engine speed can be adjusted
between 650 and 900 RPM.
Continuing to press the switch when
at either of these limits will result in
two short sounds from the buzzer.
The throttle control will operate
OPERATION
when in the Trolling Speed Control
mode, but once the speed reaches
3,000 RPM, the Trolling Speed
Control is deactivated. If 3,000 RPM
is not reached and the throttle is
closed, the engine speed will
decrease to the Trolling Speed
Control setting.
55