Honda Marine BF135A Owner's Manual page 75

SPARK PLUG COVER
5. Remove the two bolts with the 6
mm hex wrench, and remove the
spark plug cover.
WIRE CONNECTOR
BOLTS
6. Use a 6 mm hex. wrench to
remove the bolt holding the
ignition coil. Move the ignition
coil to a position that allows
removal of the wire connector
easily.
7. Disconnect the wire connector
from the ignition coil by pushing
on the lock tab and pulling on the
connector. Pull on the plastic
connector, not the wires.
SERVICING YOUR OUTBOARD MOTOR
IGNITION COIL
BOLT
8. Remove the ignition coil by
pulling it up slightly.
Do not strike or drop the ignition
coil, or it may be damaged and
require replacement.
SPARK PLUG
WRENCH
9. Remove the spark plugs with a
spark plug wrench and 19 mm eye
wrench.
19 mm EYE
WRENCH
73