Engine Oil - Honda Marine BF135A Owner's Manual

1. Unhook the drain hose from the
front bracket clamp.
2. Set the end of the hose toward the
outside of the engine undercase.
Place an approved gasoline
container below the fuel drain
outlet, and use a funnel to avoid
spilling fuel.
3. Loosen the vapor separator drain
screw.
Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
4. Tilt the outboard motor up all the
way. Leave the outboard motor
tilted up until the gasoline stops
flowing.
5. After thoroughly draining, tighten
the drain screw securely and return
the outboard motor to the vertical
position.
6. Clamp the drain hose on the front
bracket clamp.
7. Drain the fuel tank into an
approved gasoline container or, if
you need to store fuel in the fuel
tank, you can extend fuel storage
life by filling the fuel tank with
fresh gasoline and adding a fuel
stabilizer that is formulated for
that purpose.
STORAGE

Engine Oil

1. Change the engine oil and the oil
filter (p. 66 69 ).
2. Remove the spark plugs (p.
and remove the emergency stop
switch clip from the emergency
stop switch.
3. Pour 1 2 teaspoons (5
(p. 102 ) of clean engine oil into
each cylinder.
4. Rotate the engine a few
revolutions to distribute the oil in
the cylinders.
5. Reinstall the spark plugs (p.
72 ),
3
10 cm )
74 ).
87