Water Separator Inspection And Service - Honda Marine BF135A Owner's Manual

SERVICING YOUR OUTBOARD MOTOR
Water Separator Inspection and
Service
INTAKE MANIFOLD
WATER SEPARATOR
The water separator is located below
the intake manifold. Water
accumulation in the water separator
can cause loss of power or hard
starting. Check the water separator
periodically. Clean it or consult with
an authorized Honda Marine dealer
for cleaning.
80
Gasoline is highly
flammable and explosive.
You can be burned or
seriously injured when
handling fuel.
Stop the engine and keep
heat, sparks, and flame
away.
Handle fuel only
outdoors.
Wipe up spills
immediately.
1. Remove the engine cover (p.
2. Remove the separator assembly. If
it is difficult to remove the
separator assembly by yourself,
consult an authorized Honda
Marine dealer.
SEPARATOR
ASSEMBLY
SUSPENSION STRAP
Remove the suspension strap from
the water separator bracket; then
remove the strap from the
65 ). separator assembly.
During removal of the separator
assembly, take care not to damage
the wire harness with the separator
bracket.
3. Pinch the fuel tubes with tube
clamps to prevent fuel leakage.
FUEL TUBES