Hitachi Accuvue HM-4721-D User Manual page 13

q
3 RESET button
Hold down this button for two seconds to display the default screen.
NOTE
After this, if you press the STORE button, the displayed data is stored in
the memory. If you want to recall the user stored data, turn off/on the
front POWER switch.
c l 4 STORE button
Press this button after the end of adjustment to store new adjustment
data in the monitor. The stored data is recalled to display the initial
screen when the power is turned on again after once turned off. If this
button is pressed in adjustment mode, the mode is changed to normal
operation mode and all indicators go out.
c l 5 SELECT button
When this button is pressed, the indicator lights up as follows:
Holding down the
SELECT button
and pressing the
ADJUST (4 button
6 ADJUST button
E - 1 0
MODE 1
COLOR Color temperature
Press SELECT
button
Functions as described in Table 3.1 for each item selected with the
SELECT button (the indicator lights up). Use the MODE selection
switch to select MODE 1 or MODE 2.
facto
for
MODE 2
Press SELECT
Holding down the
SELECT button and button
pressing the
ADJUST (-1 button