Hitachi Accuvue HM-4721-D User Manual page 7

Improper cabling, may cause injury or a risk of shock.
WARNING
DO NOT allow anything to rest on the power cord.
DO NOT locate the monitor where persons will walk on the cord.
When routing cable, try to make rounded bends rather than sharp ones
that can kink the cable.
Using extension cord, may cause a risk of fire or electrical shock.
WARNING
If an extension cord is used with this monitor, make sure that the total of
the ampere ratings on the loads plugged into the extension cord does not
exceed the extension cord ampere rating.
WARNING Connecting unspecified input signal (voltage and horizontal
frequency), may cause serious damage to the monitor.
Confirm the input signal voltage and horizontal frequency before you
connect the video cable to the monitor.
Solvents, may cause damage to the cabinet.
CAUTION
DO NOT use liquid cleaners or aerosol cleaners directly on the surface of
the cabinet.
Wet a damp cloth with cleaner and apply it to the cabinet.
NOTE
Ergonomics for User and Manufacturer
A. For ergonomical reasons it is recommended not to use the primary
color blue on dark background ( bad visibility, strain for eyes because
B. An A/R (Anti-Reflection) panel on the CRT reduces eye strain on the
end-user. Be careful of the following items.
1. Do not touch the screen of the CRT, because soiling and fingerprints
2. Clean the surface of the CRT according to the procedure 2.1 and 2.2
E - 4
of low character contrast.)
reduce legibility and the effectiveness of anti-reflection treatment.
when the surface has soiling or fingerprints.
2.1 Clean the surface of the CRT with a cleaning solution.
2.2 Remove the cleaner by using a damp cloth and wipe the surface
with a soft, dry cloth.