This chapter explains in detail how to operate the HM-4721-D/HM-4787-D
monitor. At first, before you operate your monitor , turn on the rear main
power switch of your monitor. (The position of the main power switch, see
page E - 7.) This section briefly describes the functions of the switches and
Located on the rear panel of the monitor. Set to ' I ' to turn on the power,
and the power indicator becomes green. Set to '0' to turn off the power.
If the monitor will not be used for a long time, turn off this
(2) Front Power switch
When this switch is pressed while the Main Power switch is on and the
power indicator is green, the indicator turns to orange and nothing is
displayed on the screen. Pressing this switch again turns on the screen
display and changes the indicator to green.
The screen can display while this indicator is green, but not when it is
Degausses the monitor.
This is recommended if the monitor is moved or changed in
Selects an adjustment mode with the MODE selection switch.
Set to the upper position for MODE 1 and the lower position or
The items listed in Table 3.1 (page E - 9) can be adjusted in these two
E - 8