Improper Cable connection, may cause injury or damage to the monitor.
Turn off the power before connecting any cables.
Connect video signal cables to either of the corresponding BNC input
connectors or mini D-Sub connector on the rear panel as shown in Fig. 2.1.
Synchronization input is possible for composite sync on green signal, H. V.
mixed external sync signal and H.V. separate external sync signal. (Auto
REMOTE CONTROL INTERFACE PORT
This port is used only for Factory preset and this is not user accessible.
The input voltage range for this equipment will be selected automatically.
To comply with FCC regulations, a shielded interface cable is required.
Fig. 2.1 Rear View
E - 7