Advertisement
3. Click on the button labeled: "Finish and Start Auto Provisioning" (See Figure
2-2). Once the Automatic Extensions Provisioning screen loads (See Figure
2-3), the GXE will begin finding devices by waiting for them to communicate
via DHCP. At this point, please start connecting all SIP devices/phones into
the switch/hub. The page will keep refreshing as the GXE looks for new
devices.
In addition, your SIP devices/phones need to have DHCP enabled as well as have
DHCP Option 66 allowed to be auto-provisioned; these are factory default settings
on Grandstream products as well as many others.
Note: if you don't want to use the Auto Provisioning, you can simply Click on the
button labeled: "Finish".
To ensure proper auto-provisioning of Grandstream IP phones, connect the IP phones
to the switch/hub after Step 3, as the GXE will only auto-provision phones found
during this stage.
4. As the SIP devices/phones are auto-provisioned, the "Number of extensions
provisioned" counter will increment to inform you of the auto-provisioning
progress. Press the "Stop Auto Provisioning and Done" button when all
devices are configured (See Figure 2-3), this will stop the Auto Provisioning
and reboot the GXE. After that, the Extensions Directory page will load
automatically (See Figure 2-4). This will show you the default operator
extension and all devices found during the Auto Provisioning step.
5. You are now ready to make phone calls locally!! Try to make calls between
your extensions.
6. To make a call pick up the receiver and dial the extension and press the send
button or #.
GXE 502X Quick Start Guide
Figure 2-2
Figure 2-3
Figure 2-4
October 2009
Page 4
Advertisement
