Lan Traffic Only - Qlogic Storage Networking (Unified Fabric Pilot Installation Manual

The next step is to verify that the switch allows more TCP traffic when more
bandwidth is available.
741MBps after stopping the FCoE traffic. Again, the switch is behaving properly.
Table 5-4
FCoE Traffic Only
FCoE Plus TCP

LAN Traffic Only

The test continues cycling FCoE traffic and TCP traffic on and off. The results
show that the switch continues to enforce the ETS configuration, allows both TCP
and FCoE to use additional bandwidth when available, and maintains minimum
guaranteed bandwidth to both traffic classes.
51031-00 A
Figure 5-25
Figure 5-25. LAN Traffic Only
summarizes the throughput achieved for the previous three tests.
Table 5-4. Summary of Throughput Characteristic
Storage to
Switch (MBps)
837.84
600.25
5–Validation Methods for DCB and FCoE
Validation Step 5—ETS Verification
shows that the TCP traffic increases to
LAN Traffic Switch to
(MBps) Adapter (MBps)
0
576.34
0 741.07
Error
837.83 No
1176.59 No
741.07 No
5-23