Table of Contents
Advertisement
4–Installation
Verify Equipment Connectivity
Verify Equipment Connectivity
To verify that all equipment is logged in and operating properly:
1.
Verify LAN management capability on all devices through the associated
device management application.
2.
Verify that servers and Converged Network Adapters are logged into an
FCoE switch under both Ethernet (eth1/16) and Fibre Channel (vfc116)
protocols.
Nexus 5000 FCoE switch.
Figure 4-4. Device Manager Interface—Verify Server and Adapter Login
3.
Verify that storage devices have logged into a switch
Channel and FCoE storage devices log into Fibre Channel or FCoE
switches; iSCSI storage devices log into Ethernet or FCoE switches.
Figure 4-5. Device Manager Interface—Verify Storage Login
4-10
Figure 4-4
shows the Device Manager interface for the Cisco
Ethernet and Fibre Channel Login Status
Storage Login Status
(Figure
4-5). Fibre
51031-00 A
Advertisement
Table of Contents
Need help?
Do you have a question about the Storage Networking (Unified Fabric Pilot and is the answer not in the manual?
Questions and answers