Storage
Depending on your storage, you may connect directly to the Nexus 5000 switch
through FCoE, as in the case of NetApp, or through other methods (Fibre
Channel, iSCSI, NFS, CIFS). Consult your disk storage documentation for
instructions on how to enable FCoE (NetApp) and assign disk storage LUNs.
51031-00 A
bandwidth percent 50
Class-map (queuing):
Match: qos-group 1
bandwidth percent 50
Class-map (queuing):
Match: qos-group 0
bandwidth percent 0
Service-policy (queuing) output:
policy statistics status:
Class-map (queuing):
Match: qos-group 2
bandwidth percent 50
Class-map (queuing):
Match: qos-group 1
bandwidth percent 50
Class-map (queuing):
Match: qos-group 0
bandwidth percent 0
Equipment Installation and Configuration
class-fcoe (match-any)
class-default (match-any)
policy1
disabled
class-nic (match-any)
class-fcoe (match-any)
class-default (match-any)
4–Installation
4-9
Need help?
Do you have a question about the Storage Networking (Unified Fabric Pilot and is the answer not in the manual?
Questions and answers