Table of Contents
Advertisement
4.
When the LUNs have been created and all zoning is complete, use the
management interface to add the Converged Network Adapter Fibre
Channel WWNs and iSCSI initiators to your storage so that the servers can
discover the LUNs.
Converged Network Adapters and the created initiator groups on a NetApp
Filer after zoning is complete.
5.
Reboot the servers to discover the assigned LUNs.
6.
Verify that server operating system and SANsurfer management application
can discover the assigned LUNs
51031-00 A
Figure 4-6
Figure 4-6. NETApp Zone Validation
Verify Equipment Connectivity
shows an example of the discovered FCoE
(Figures 4-7
and 4-8).
4–Installation
4-11
Advertisement
Table of Contents
Need help?
Do you have a question about the Storage Networking (Unified Fabric Pilot and is the answer not in the manual?
Questions and answers