Qlogic Storage Networking (Unified Fabric Pilot Installation Manual page 25

5. Configure qos policy-maps.
policy-map type qos policy1
6. Configure queuing policy-maps and assign network bandwidth. Divide the
network bandwidth evenly between FcoE and NIC traffic.
policy-map type queuing policy1
7. Configure network-qos policy maps and set up the PFC for no-drop traffic
class.
policy-map type network-qos policy1
8. Apply the new policy (PFC on NIC and FcoE traffic) to the entire system.
system qos
9. Create a unique VLAN for FCoE traffic and NIC traffic.
Vlan 2
Vlan 1002
51031-00 A
class type qos class-nic
set qos-group 2
class type queuing class-nic
bandwidth percent 50
class type queuing class-fcoe
bandwidth percent 50
class type queuing class-default
bandwidth percent 0
class type network-qos class-nic
pause no-drop
service-policy type qos input policy1
service-policy type queuing output policy1
service-policy type queuing input policy1
service-policy type network-qos policy1
Exit
Fcoe vsan 1
Exit
Equipment Installation and Configuration
4–Installation
4-7