And Fcoe Switch; Validation Results - Qlogic Storage Networking (Unified Fabric Pilot Installation Manual

5–Validation Methods for DCB and FCoE
Validation Step 2—FIP Validation

Validation Results

Figure 5-6
the Cisco Nexus 5000 FCoE switch.
Figure 5-6. FIP Verification Results—Converged Network Adapter
From the captured trace, you can verify the following:

FIP version used by both devices is 1.

FCoE VLAN ID returned by the switch is 1002.

The link is capable of delivering 2181-byte frames.

The end device was able to log in to the switch with the FIP FLOGI.

The switch sent an Accept FLOGI that specifies 01181C as the Fibre
Channel Source ID and 0E:FC:00:01:18:1C as the MAC address.

All subsequent FCoE messages use the source MAC address
0E:FC:00:01:18:1C for the end device.
5-8
shows the FIP test results between the QLogic QLE8152 adapter and

and FCoE Switch

51031-00 A