Specifications; Ac Current Capacity; Linear Noise Attenuation; Power Consumption - Furman ELITE-15 PF i Owner's Manual

Specifications

AC Current Capacity:

Input - 15 Amp capacity required
Output - 11-15 Amps RMS (maximum, all outlets combined - continuous)

Linear Noise Attenuation:

Transverse (Differential) Mode:
>40 dB from 10Khz. - 100 kHz.
>80 dB from 100 Khz. – 1GHz.
(Linear attenuation curve from 0.05 – 100 ohms line impedance)
Transient Voltage Surge Suppression:
120 VAC - Series Multi-Stage Protection - Non-Sacrificial with Zero Ground Contamination
(188 V peak clamping @ 6000V 3000A input
Extreme Voltage Shutdown (>140 VAC)
Telco
Cable / Satellite (less than .1dB insertion loss)

Power Consumption:

12 Watts for display and control circuits independent of actual load.
Outlets:
1 (linearly filtered outlet, front panel)
4 (linearly filtered audio-video outlets, 2 switched via 12V trigger)
4 (linearly filtered outlets with additional ultrasonic filtering for video components, 2 switched via 12 V trigger)
4 (Power Factor Technology amplifier outlets, 3 amps RMS reserve, resistive load, over 45 amps peak charge,
2 switched with 5 second delay via 12V trigger)
Dimensions:
4" H x 17" W x 14.75" D (Standard 2 RU height without feet)
Weight:
15 lbs.
11