Related Manuals for Furman Elite-16 PF E
Summary of Contents for Furman Elite-16 PF E
- Page 2 Elite-16 PF E Manual eatures ◊ Power Factor correction provides surplus current for power-starved amplifiers ◊ Linear Filtering Technology (LiFT) for unequaled audio / video clarity ◊ Series Multi-Stage Protection Plus (SMP+) for virtually maintenance-free AC surge suppression ◊ Zero ground contamination circuitry protects critical digital components ◊...
- Page 3 – no damaged equipment, no service calls, no down time. At the center of the Elite-16 PF E is our unique Power Factor Correction Circuit. first time, low-level analog, digital, and video components are not modulated or distorted via the power amplifier’s extreme AC current...
- Page 4 You may need them if you should ever have to return the unit to the factory for servicing. The box should contain the Elite-16 PF E unit, detachable AC cord, rack mount kit, owner’s manual, and warranty registration card.
- Page 5 Once the Elite-16 PF E is placed, its AC cord’s female end must be plugged into the male IEC connector located on the lower left hand side of the rear panel (when facing the rear panel).
- Page 6 Simply put, the type of power supplies or electronic circuits connected to the Elite-16 PF E will have an effect on its circuit breakers perceived current load, and therefore, when it will trip. Though the benefits...
- Page 7 If this happens, some level of protection from voltage surges will remain, but the Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair. ok F ImmIng the...
-
Page 8: Connected Equipment Warranty
Elite-16 PF E Manual arranty Furman Sound, LLC. warrants to the original purchaser of this product, the Furman Elite-16 PF E, that the product will be free from defects in material and workmanship for a period of three years from the date of purchase. The... - Page 9 Before returning any equipment for repair, please be sure it is adequately packed and cushioned against damage in shipment, and that it is insured. Elite-16 PF E Manual - 9 -...
- Page 10 Elite-16 PF E Manual elIte-16 pF e specIFIcatIons ac c urrent apacIty Input - 16 Amp capacity required Output - 13-16 Amps RMS (maximum, all outlets combined - continuous) Inear oIse ttenuatIon Transverse (Differential) Mode: >40 dB from 5Khz. - 100 kHz. >80 dB from 100 Khz. – 1GHz.
- Page 12 Furman Sound, LLC. 1690 Corporate Circle Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: info@furmansound.com 0512.21-B...