ELITE 15 PF OWNER’S MANUAL T h e E l i t e 1 5 PF F e at u r e s • Power Factor correction provides surplus current for power-starved amplifiers • Linear Filtering Technology for unequaled audio / video clarity •...
This low level content is critical because it relays the crucial harmonics and ambience in audio, as well as the depth and clarity in video. With Furman’s exclusive Linear Filtering Technology, televisions, projectors, DVD players, ampliﬁ ers, and processors are fed linearly-ﬁ...
The box should contain the Elite-15 PF unit, detachable AC cord, rack mount kit, owner’s manual, and warranty registration card. If anything is missing, please contact Furman Customer Service. Fill out and return your warranty registration card. Registration is recommended because it can be used...
ELITE 15 PF OWNER’S MANUAL components. Placement or proximity to other components is not critical, and the Elite-15 PF does not produce any appreciable heat under standard use. The Elite-15 PF may also be rack mounted in a standard 19” rack by attaching the Elite-15 PF rack ears.
ELITE 15 PF OWNER’S MANUAL and peak current demands many times that, the maximum total continuous current draw may be limited to a range between 1400 - 1750 Watts per Elite-15 PF employed. The RMS current available before the circuit breaker trips varies due to what is referred to as a vector load.
AC power is present at the unit’s outputs. If this happens, some level of protection from voltage surges will remain, but the Furman’s clamping voltage rating will be compromised. The unit must be returned to Furman Sound, or an authorized Furman Service center for repair.
ELITE 15 PF OWNER’S MANUAL the incoming and out going cable from the Elite- 15 PF. Connect the incoming connector to the component that formerly received the out going connector, thus by-passing the in-line protection. If the signal is present (but not when used with the Elite-15 PF) then the protection circuit is damaged (assuming it worked properly before a storm or catastrophic event).
Furman website. Shipping charges to the Furman factory or to an authorized repair location must be prepaid by the purchaser of the product. Furman shall, at its own expense, furnish a replacement product or, at Furman’s option, repair the defective product. Return shipping charges back to purchaser will be paid by Furman.
ELITE 15 PF OWNER’S MANUAL or components. This warranty shall be cancelable by Furman at its sole discretion if the product is modiﬁ ed in any way without written authorization from Furman. This warranty also does not apply to products upon which repairs have been affected or attempted by persons other than pursuant to written authorization by Furman.
4” H x 17” W x 14.75” D (Standard 2 RU height without feet) Weight: 15 lbs. Safety Agency Listing: NRTL-C NRTL-C 12/18/04_A Furman Sound, Inc. 1997 South McDowell Blvd. Petaluma, California 94954-6919 USA Phone: 707-763-1010 Fax: 707-763-1310 Web: www.furmansound.com E-mail: email@example.com...