Security Example: Switches And Hbas With Authentication; Security Example: Switches And Hbas; Security Example: Radius Server - Qlogic SANbox 5000 Series Installation Manual

3 – Planning
Fabric Security
Consider the devices, switches, and management agents and evaluate the need
for authorization and authentication. Also consider whether the security database
is to distributed on the switches or centralized on a RADIUS server and how many
servers to configure.
The following examples illustrate how to configure a security database:

Security Example: Switches and HBAs with Authentication

Security Example: RADIUS Server

Security Example: Host Authentication
3.7.4.1
Security Example: Switches and HBAs with Authentication
Consider the fabric shown in
Switch_2 support authentication while the JBOD and HBA_2 do not. The objective
is to secure F_Ports and E_Ports in the fabric. To do this, configure security on the
devices that support security: Switch_1, Switch_2, and HBA_1.
Device: HBA_1
WWN: 10:00:00:c0:dd:07:c3:4d
Security: Yes
F_Port
Device: Switch_1
WWN: 10:00:00:c0:dd:07:e3:4c
Security: Yes
Figure 3-9. Security Example: Switches and HBAs
3-20
Figure 3-9. In this fabric, Switch_1, HBA_1, and
Device: JBOD
WWNS:10:00:00:d1:ee:18:d4:5e
10:00:00:d1:ee:18:d4:5f
10:00:00:d1:ee:18:d4:5g
Security: No
FL_Port
E_Port
S
Device: HBA_2
WWN: 10:00:00:c0:dd:07:c3:4f
Security: No
F_Port
Device: Switch_2
WWN: 10:00:00:c0:dd:07:e3:4e
Security: Yes
59096-04 A