Laser Safety Information; Electrostatic Discharge Sensitivity (Esds) Precautions - Qlogic SANbox 5000 Series Installation Manual

1 – Introduction

Laser Safety Information

1.8
Laser Safety Information
This product uses Class 1 laser optical transceivers to communicate over the fiber
optic conductors. The U.S. Department of Health and Human Services (DHHS)
does not consider Class 1 lasers to be hazardous. The International
Electrotechnical Commission (IEC) 825 Laser Safety Standard requires labeling in
English, German, Finnish, and French stating that the product uses Class 1
lasers. Because it is impractical to label the transceivers, the following label is
provided in this manual.
The following warning applies to XPAK optical transceivers:
WARNING!!
1.9

Electrostatic Discharge Sensitivity (ESDS) Precautions

The assemblies used in the switch chassis are ESD sensitive. Observe ESD
handling procedures when handling any assembly used in the switch chassis.
1-8
LASER RADIATION
DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS
CLASS 1M LASER PRODUCT
S
59096-04 A