Sansurfer Switch Manager - Qlogic SANbox 5600 Series User Manual

A
2.2.1

SANsurfer Switch Manager

You can install SANsurfer Switch Manager on a Windows, Linux, Solaris, or Mac
OS X workstation. To install the SANsurfer Switch Manager application from the
SANsurfer Switch Manager Installation Disk, do the following:
For a Windows platform:
1. Close all programs currently running, and insert the SANsurfer Switch
Manager Installation Disk into the management workstation CD-ROM drive.
2. In the upper left corner of the product introduction screen, click
Management Software.
3. Locate your platform in the table and click Install.
If the product introduction screen does not open in step 2, open the CD with
Windows Explorer and run the installation program with the following path:
data\files\Management_Software\Windows\Windows_5.00.xx.xx.exe
For a Linux platform:
Open the CD and run the installation program with the following path:
data/files/Management_Software/Linux/Linux_5.00.xx.xx.bin
If there is no CD-ROM icon, do the following:
1. Open an xterm or other terminal window.
2. Mount the CD-ROM. From a shell prompt, enter the following:
3. Change directory to the location of the install program:
4. Execute the install program and follow the installation instructions.
For a Solaris platform:
1. Open a terminal window. If the disk isn't already mounted, enter the
following command:
2. Enter following command to move to the directory on the CD that contains
the executable:
3. Execute the install program and follow the installation instructions:
59097-02 B
mount /mnt/cdrom
cd /mnt/cdrom/data/files/Management_Software/Linux
Linux_5.00.xx.xx.bin
volcheck
cd /cdrom/cdrom0/data/files/Management_Software/solaris
Solaris_5.00.xx.xx.bin
2 – Using SANsurfer Switch Manager
Installing the Management Application
2-3