4 – Managing Switches
Configuring a Switch
4.7.7
SNMP Properties
Use the SNMP Properties dialog shown in
configuration parameters. After making changes, click the OK button to put the
new values into effect. To open the SNMP Properties dialog, select a switch in the
topology display or open the faceplate display, open the Switch menu and select
SNMP Properties.
NOTE:
4-32
Since Read Community, Trap Community, and Write Community
settings are like passwords and are write-only fields, the current
settings are displayed as asterisks.
Figure 4-13. SNMP Properties Dialog
Figure 4-13
to change SNMP
S
59097-02 B