Devices Data Window; Switch Data Window - Qlogic SANbox 5600 Series User Manual

4 – Managing Switches
Displaying Switch Information
4.2.1

Devices Data Window

The Devices data window displays information about devices (hosts and storage
targets) connected to the switch. Click the Devices tab below the data window to
display name server information for all devices that are logged into the selected
fabric. To narrow the display to devices that are logged into specific switches,
select one or more switches in the fabric tree or the topology display. Refer to
"Devices Data Window" on page 3-34
Devices data window.
4.2.2

Switch Data Window

The Switch data window displays current network and switch information for the
selected switches. Refer to
information about the Switch data window. To open the Switch data window, select
one or more switches in the topology display, or open the faceplate display, and
click the Switch tab below the data window.
window entries.
First Port Address
World Wide Name
Serial Number
Reason for Status
User Name
Login Level
Super User
UserAuthentication
Enabled
Vendor
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Boot Version
4-8
"Configuring a Switch" on page 4-18
Table 4-2. Switch Data Window Entries
Entry
Switch Fibre Channel address
Switch World Wide Name
Number assigned to each chassis. Required for license
keys
Additional status information
Account name
Authority level
Super user privileges enabled/disabled
Enforcement of account names and authority (always
True)
Switch manufacturer
Active firmware version
Inactive firmware version
Firmware version that will be activated at the next reset
PROM boot version
for a description of the entries in the
Table 4-2 describes the Switch data
Description
S
for more
59097-02 B