Remote Logging; Ntp Client - Qlogic SANbox 5600 Series User Manual

A
4.7.6.2

Remote Logging

The Remote Logging (syslog) feature enables saving of the log information to a
remote host that supports the syslog protocol. When enabled, the log entries are
sent to the syslog host at the IP address that you specify in the Logging Host IP
Address field. Log entries are saved in the internal switch log whether this feature
is enabled or not.
To save log information to a remote host, you must edit the syslog.conf file
(located on the remote host) and then restart the syslog daemon. Consult your
operating system documentation for information on how to configure Remote
Logging. The syslog.conf file on the remote host must contain an entry that
specifies the name of the log file in which to save error messages. Add the
following line to the syslog.conf file. A <tab> separates the selector field
(local0.info) and action field which contains the log file path name
(/var/adm/messages/messages.name).
local0.info <tab> /var/adm/messages.name
4.7.6.3

NTP Client

The NTP Client feature allows switches to synchronize their date and time with a
centralized server. NTP client ensures the consistency of date and time stamps in
alarms and log entries. An Ethernet connection to NTP server is required. Refer to
"Setting the Date/Time and Enabling NTP Client" on page 4-16
information.
59097-02 B
4 – Managing Switches
Configuring a Switch
for more
4-31