Qlogic SANbox 5800V Series User Manual page 65

A
Merge Auto Save
Zoning Default Visibility
Default Zone
Discard Inactive
Implicit Hard Zoning
Security Auto Save
Security Fabric Binding Enable N/A - does not apply to this switch
R_A_TOV
E_D_TOV
Number of Donor Groups
Inactivity Timeout
In-band Enabled
Principal Switch
59264-02 A
Table 4-1. Switch Data Window Entries (Continued)
Entry
Advanced Group
Description
If enabled, any zoning updates from the fabric will be
saved in permanent (non-volatile) memory as well as
temporary memory. If disabled, any zoning updates
from the fabric will be saved only in temporary memory
and will be lost after a switch reset.
N/A - does not apply to this switch
Disables communication between ports and devices
not defined in the active zone set, or when there is no
active zone set.
Automatically removes the previously active zone set
when a zone set is activated on a switch.
Introduces hardware enforcement of zoning regardless
of type. All zones and all supported zone member
types will have hardware enforcement.
N/A - does not apply to this switch
Resource allocation timeout value
Error detect timeout value
Total number of donor port groups. A donor group is a
set of ports on a switch that can donate buffer credits to
each other.
Number of minutes the switch waits before terminating
an idle command line interface session. Zero (0) dis-
ables the time out threshold.
In-band management status. Permits (True) or pre-
vents (False) a switch from being managed over an
ISL.
If there is a domain ID conflict in the fabric, the switch
with the highest principal priority, or the principal
switch, will reassign any domain ID conflicts and estab-
lish the fabric.
4 – Managing Switches
Using the Switch Data Window
4-7