Qlogic SANbox 5800V Series User Manual page 63

A
Broadcast Support
NTP Client Enabled
NTP Server Address
Use Front Port
DNS Enabled
Configured Local Hostname
IPv6 Assigned Address (1-20)
User Name
Login Level
Super User
UserAuthentication Enabled
Firmware Version
Inactive Firmware Version
Pending Firmware Version
PROM/Flasher Version
NTP Client Enabled
NTP Server Address
59264-02 A
Table 4-1. Switch Data Window Entries (Continued)
Entry
User Login Group
Firmware Group
Services Group
Description
Broadcast support status. Broadcast support is
enabled (default) or disabled.
Enabled or disabled. Allows for switches to synchro-
nize their time to a centralized server.
The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
N/A - does not apply to this switch
DNS Enabled status
Hostname for the switch. If a fully qualified domain
name is given, the domain suffix is used as the first
suffix in the DNS search list for DNS lookups per-
formed by the switch.
The set of IPv6 addresses assigned by DHCPv6, NDP,
or the switch administrator.
Account name
Authority level
Super user privileges enabled/disabled
Enforcement of account names and authority (always
True)
Active firmware version
This field does not apply to this switch
Firmware version that will be activated at the next reset
PROM firmware version
Enabled or disabled. Allows for switches to synchro-
nize their time to a centralized server.
The IP address of the centralized NTP server. Ethernet
connection to NTP server is required.
4 – Managing Switches
Using the Switch Data Window
4-5