Qlogic SANbox 5800V Series User Manual page 104

4 – Managing Switches
Using Call Home
Primary SMTP Server
Address:
Primary SMTP Server Port: This is the service port number that the primary SMTP
Secondary SMTP:
Secondary SMTP Server
Address:
Secondary SMTP Server
Port:
Contact Email Address:
Phone Number:
Street Address:
4-46
Table 4-11. Call Home Setup Entries (Continued)
Entry
This is the IP address of the primary (first) SMTP server.
server is listening on to accept connections from SMTP
sending agents.
The Secondary SMTP is the second SMTP server. If the
primary SMTP is not enabled/defined, or if there was a
failure in communicating with the primary SMTP server,
the Secondary SMTP server will become the (active)
SMTP server - the one used by Call Home for the next
attempt to transmit Email.
The IP address of the secondary (second) SMTP server.
The service port number that the secondary SMTP server
is listening on to accept connection from SMTP sending
agents.
The Email address of the point-of-contact for the switch.
This Email address will be included in the text of Email
messages using the FullText format under the section for
Contact Information.
The phone number of the point-of-contact for the switch.
This value will be included in the text of Email messages
using the FullText format under the section for Contact
Information.
The address of the point-of-contact for the switch. This
value will be included in the text of Email messages using
the FullText format under the section for Contact Informa-
tion.
Description
S
59264-02 A